Article Archives

Filter

Hide Filter

  • Analytical Method Development in the Quality by Design Framework

    Tuesday, December 16, 2014
    Application Note
    Torgny Fornstedt Dennis Åsberg Jörgen Samuelsson Anders Karlsson Krzysztof Kaczmarski
    The development of analytical methods in the Quality by Design (QbD) framework is currently gaining great momentum in the pharmaceutical industry. Presented here is a case study in which a ... read more

  • Direct Improvement With Direct Dilution

    Friday, August 09, 2013
    Application Note
    Joe Olechno Sean Ekins Antony J. Williams Mark Fischer-Colbrie
    The advent of a new technology often brings far-reaching benefits well beyond the initial perception of its key advantages. Acoustic dispensing, for example, with the ability to have highly ... read more

  • R&D Informatics at Molecular Med Tri-Con 2013

    Tuesday, February 26, 2013
    Technical Article
    Robert L. Stevenson, Ph.D.
    Integrated R&D Informatics and Knowledge Management (I&KM) was the title of one of the 15 programs spread over three days at the 20th Molecular Med Tri-Con held February 13–15 at the Moscone Center in... read more

  • Dynamic Mechanical Thermal Analysis Measurements Using a Rotational Rheometer

    Sunday, January 01, 2012
    Application Note
    Prajakta Kamerkar
    Many industries use a rotational rheometer on a daily basis to understand the mechanical properties and flow characteristics of a variety of viscoelastic materials. read more

  • Small-Scale Vane Rheometry

    Tuesday, August 02, 2011
    Application Note
    David Moonay
    Vane rheometry continues to become more well-known and popular. read more

  • Drying of Problematic Purification Samples by Lyophilization in a Centrifugal Evaporator

    Monday, June 13, 2011
    Application Note
    Induka Abeysena Rob Darrington
    Lyophilization is often the preferred method of sample drying because a high level of dryness is achieved with low residual solvent levels, and because of the light, powdery, “fluffy” finish of the ... read more

  • Are You Attracted to Science? Attend Pittcon®—The Magnet for Scientific Innovation

    Tuesday, February 01, 2011
    Technical Article
    Penny. R Gardner
    We are very excited for Pittcon® 2011 to be back in Atlanta, GA, March 13–18, at the Georgia World Congress Center. read more

  • Redefining the Rheometer

    Monday, October 27, 2008
    Application Note
    Steve Carrington
    The way in which materials flow or deform when a force is applied can have a direct impact on product performance. read more

  • Increased Throughput in Method 8270 Analysis

    Monday, January 01, 2007
    Application Note
    William D. Goodman Frank DeLorenzo
    Method 8270 is a GC-MS method created by the U.S. EPA Office of Solid Waste for the analysis of semivolatile organics by gas chromatography-mass spectrometry. read more

  • Automated Chemical Ionization in GC-MS

    Monday, January 01, 2007
    Application Note
    Chris Sandy Jean-Francois Garnier Bernhard Rothweiler Fred Feyerherm Sihem Ben Mahmoud Harry F. Prest
    Gas chromatography with mass spectrometric detection using chemical ionization (CI) has demonstrated great utility in a wide variety of application areas ranging from forensics to environmental to ... read more

  • Flow Characterization: Selecting Appropriate Technology

    Tuesday, November 01, 2005
    Application Note
    Steve Carrington Joanne Langridge
    It is well known that measuring the rheological properties of materials contributes to the development of better products and helps predict end-use performance as well as the physical properties of a... read more
  • <<
  • >>