Article Archives

Filter

Hide Filter

  • Thorough Risk Assessment Supports At-Scale Process Safety

    Wednesday, July 16, 2014
    Application Note
    Urs Groth
    It goes without saying that in any manufacturing environment no one sets out to design an unsafe process. However, it is not enough to ensure a process will be safe under normal operating conditions. read more

  • High-Content Analysis Comes Full Circle in Only Eight Years

    Monday, April 18, 2011
    Technical Article
    Robert L. Stevenson, Ph.D.
    In eight short years, high-content analysis (HCA) has circled back to its roots, where many practitioners are again using personal instruments. read more

  • Providing Purge Gas for FTIR Systems

    Monday, April 18, 2011
    Technical Article
    Peter Froehlich Kim Myers
    While a Fourier transform infrared (FTIR) spectrophotometer provides a number of benefits relative to a scanning IR spectrophotometer,a significant disadvantage of an FTIR system is that the presence ... read more

  • Simple, Environmentally Friendly Mercury Analysis by U.S. EPA Method 1631

    Thursday, March 10, 2011
    Application Note
    Jason Gray
    Mercury analysis, according to U.S. EPA Method 1631E, focuses on the monitoring of waste effluents at the lowest U.S. EPA Water Quality Certification (WQC) levels. read more

  • Determination of Mercury in Slag and Cement Using a Mercury Analyzer

    Friday, January 28, 2011
    Application Note
    Sang-Ho Nam Yu-Na Kim Jin-Su Na Keun-Hyeok Yang
    Mercury is one of the most toxic elements in the environment. Humans are exposed to mercury through the inhalation of mercury vapor, ingestion of drinking water, and consumption of fish. read more

  • A Multifrequency Temperature-Modulated Technique For DSC

    Sunday, January 01, 2006
    Application Note
    Markus Schubnell Christoph Heitz Thomas Hütter Steven Sauerbrunn Juergen E.K. Schawe
    In conventional differential scanning calorimetry (DSC), a sample is subjected to a temperature program with a constant heating rate. As a result, the DSC instrument delivers an output signal, which, ... read more

  • A High-Sensitivity Sensor for DSC

    Friday, August 05, 2005
    Application Note
    Rudolf Riesen Blaine Weddle
    A dramatic increase in sensitivity at low signal noise without a significant loss in signal resolution has been achieved with the HSS7 high-sensitivity sensor. read more
  • <<
  • >>