Article Archives

Filter

Hide Filter

  • Thorough Risk Assessment Supports At-Scale Process Safety

    Wednesday, July 16, 2014
    Application Note
    Urs Groth
    It goes without saying that in any manufacturing environment no one sets out to design an unsafe process. However, it is not enough to ensure a process will be safe under normal operating conditions. read more

  • Working Flow Rate: How to Compare Vacuum Pumps

    Friday, May 17, 2013
    Application Note
    Peter Coffey
    To compare vacuum pumps, it is imperative to look at the pumping speed at working vacuum levels. The working vacuum level is the vacuum at which you need to operate your application. Comparing the ... read more

  • Pittcon® 2012: Laboratory Instrumentation and Equipment Product Showcase

    Monday, May 07, 2012
    Technical Article
    Jeanely Hunt, MS, MBA
    Pittcon® 2012 was held March 11–15, 2012 at the Orange County Convention Center in Orlando, Florida. The following product showcase provides a brief outline of new and current laboratory equipment and... read more

  • New Products at Pittcon® 2011

    Thursday, March 10, 2011
    Application Note
    Jeanely Hunt, MS, MBA
    The following includes some of the latest advances in laboratory instrumentation debuting at Pittcon® 2011. read more

  • Increased Throughput in Method 8270 Analysis

    Monday, January 01, 2007
    Application Note
    William D. Goodman Frank DeLorenzo
    Method 8270 is a GC-MS method created by the U.S. EPA Office of Solid Waste for the analysis of semivolatile organics by gas chromatography-mass spectrometry. read more

  • Automated Chemical Ionization in GC-MS

    Monday, January 01, 2007
    Application Note
    Chris Sandy Jean-Francois Garnier Bernhard Rothweiler Fred Feyerherm Sihem Ben Mahmoud Harry F. Prest
    Gas chromatography with mass spectrometric detection using chemical ionization (CI) has demonstrated great utility in a wide variety of application areas ranging from forensics to environmental to ... read more

  • A Multifrequency Temperature-Modulated Technique For DSC

    Sunday, January 01, 2006
    Application Note
    Markus Schubnell Christoph Heitz Thomas Hütter Steven Sauerbrunn Juergen E.K. Schawe
    In conventional differential scanning calorimetry (DSC), a sample is subjected to a temperature program with a constant heating rate. As a result, the DSC instrument delivers an output signal, which, ... read more

  • A High-Sensitivity Sensor for DSC

    Friday, August 05, 2005
    Application Note
    Rudolf Riesen Blaine Weddle
    A dramatic increase in sensitivity at low signal noise without a significant loss in signal resolution has been achieved with the HSS7 high-sensitivity sensor. read more
  • <<
  • >>