Pittcon 2018, to be held February 26 through March 1 in Orlando, Florida, is a “must-attend” event for anyone involved in the identification, analysis, or testing of the chemical or biological properties of compounds or molecules. This premier conference and exhibition promises to keep scientists apprised of the latest findings, instrumentation, and cutting-edge technologies. Below are important new products that will be on display, listed in alphabetical order by company name.
ARGOS TECHNOLOGIES—Booth 2054
![ARGOS TECHNOLOGIES; Booth 2155](https://media.americanlaboratory.com/m/20/article/344056_fig23.jpg)
Pipette Controller
Users can get more than nine hours of continuous use with the Omega Zen pipette controller. This portable, lightweight, and ergonomic unit can be used with plastic or glass pipettes from 1 to 100 mL. Its balanced design and contoured buttons help prevent hand fatigue even after hours of use. A liquid crystal display for speed modes and battery life make pipetting easy. Magnetic sensors provide more accurate speed control.
http://www.argos-tech.com
AXCEND—Booth 1802
![AXCEND; Booth 1802](https://media.americanlaboratory.com/m/20/article/344056_fig29.jpg)
Mobile Gradient Liquid Chromatograph
The Axcend Focus LC is a gradient liquid chromatograph designed specifically for mobile and on-the-go use, but powerful enough to be used in any state-of-the-art laboratory. Developed in the Brigham Young University laboratories of Professor Milton Lee, Ph.D., the nanoflow liquid chromatograph measures ~30 × 20 × 20 cm, weighs ~12 lb, and operates on battery or electrical outlet power. Visual/statistical output from the LC is delivered securely and wirelessly to any Web-connected smartphone, tablet, or PC capable of HTML5 display, with the additional ability to connect via a USB cable to any PC. It provides 100× greater sensitivity than traditional LC systems, while dramatically reducing volume sizes. In addition, it requires as little as 1/500th the volumes of samples and solvents. If run continuously for one week, the instrument produces only 1 tsp of waste.
https://www.axcendcorp.com/
BEL-ART/SP SCIENCEWARE—Booth 2953
![BIOTAGE; Booth 3112](https://media.americanlaboratory.com/m/20/article/344056_fig12.jpg)
Triple-Scale Beer and Wine Hydrometer
Users can achieve perfect beer-brewing and wine-making results with the shatterproof DURAC triple-scale beer and wine hydrometer. Specific gravity, potential alcohol by volume (PAV), and Brix scales provide invaluable data points when crafting beer, wine, kombucha, mead, cider, and more. Useful in either a commercial or home-brew setting, the unit’s all-plastic design removes the risk of contamination due to instrument breakage, and the flat surface makes results easy to read.
http://www.belart.com
BIOTAGE—Booth 3112
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig6.jpg)
Automated Evaporation System
The modern design of the Biotage TurboVap LV features many new enhancements, including a well-lit glass tank for much greater visibility, removable/replaceable nozzles on the lid, on-the-fly nozzle adjustment, easily exchangeable manifolds to extend functionality, programmable evaporation flow gradients, easy access drain port, and user-friendly touchscreen interface. The system can be vented from the bench or placed in a fume hood. Because the footprint is noticeably smaller on the modern unit, less space is required.
http://www.biotage.com
CARVER INC.—Booth 3453
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig1.jpg)
Automatic Hydraulic Laboratory Presses
Carver, Inc. Auto Series Plus automatic hydraulic laboratory presses feature a large 7” color touchscreen operator interface, enhanced platen temperature control and autotuning, ramp heating capability, real-time trending of force and temperature, and optional seven-day timer for auto heat-up. They also offer storage of up to 250 recipes, recipe preview, and optional datalogging for cycle parameters, and are available with 15–48 tons of clamping force and 6” × 6” to 19” × 19” platens.
http://www.carverpress.com
CEM—Booth 2627
![CEM; Booth 2627](https://media.americanlaboratory.com/m/20/article/344056_fig16.jpg)
Automated Solvent Extraction System
The CEM EDGE extraction system performs solvent extraction in less than 5 minutes, including system setup and sample filtration. It combines traditional pressurized fluid extraction with dispersive solid-phase extraction to achieve high recovery and repeatability. The automated system can process 12 samples per hour to keep up with the demands of high-throughput labs. It is well-suited for U.S. EPA 3545A and Pesticides in Foods.
http://www.cem.com
COLE-PARMER—Booth 2053
![COLE-PARMER; Booth 2053](https://media.americanlaboratory.com/m/20/article/344056_fig22.jpg)
Advanced Networking Drives
Advanced networking drives for Masterflex peristaltic pumps provide options for popular networking protocols without the need to install gateways or adapters. Users can choose from either native Ethernet/IP or Profibus bi-directional communication with Bluetooth Low Energy (BLE) connectivity and a downloadable iOS-based mobile app to permit local pump monitoring and control. Cloud-based remote pump monitoring and control capability provide pump status and alerts and full operational control.
http://www.ColeParmer.com
DATAAPEX—Booth 2432
![DATAAPEX; Booth](https://media.americanlaboratory.com/m/20/article/344056_fig14.jpg)
Chromatography Software
Clarity Chromatography SW enables users to control hundreds of different instruments (including those from Agilent, Hitachi, Shimadzu, etc.) from one environment. The software is multilingual—users can switch between English, Chinese, Russian, Spanish, French, and German. Features include easy operation, user support such as free SW updates, and optional extensions (PDA, MS, GPC, NGA, etc.). Customized Clarity OEM versions are available.
http://www.dataapex.com
ENVIRONMENTAL EXPRESS—Booth 2052
![ENVIRONMENTAL EXPRESS; Booth 2153](https://media.americanlaboratory.com/m/20/article/344056_fig18.jpg)
Metals Digestion System
The latest generation of the AutoBlock from Environmental Express safely and accurately automates the most dangerous step of sample prep for metals digestion—the addition of acids and reagents. The AutoBlock Fill unit fits any size HotBlock digestion system to provide automation at an affordable price. The system is well-suited for any laboratory performing its own unique metals digestion method.
http://www.EnvExp.com
FLUID METERING, INC.—Booth 2300
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig5.jpg)
Valveless Dispensing Pump
The 400 µl Dispensing Pump from Fluid Metering, Inc. (FMI) is well-suited for medical, analytical, and biotech instrumentation. With the same compact design dimensions as the STH and STF OEM pump lines, the pump expands dispense and metering capabilities of previous STH designs by 100% while maintaining 0.5% precision. It is available in nine drive configurations ranging from 200 through 400 µL in 50-µL increments. Each drive model (STF1, STF2 … STF9) has an adjustable displacement of ±25 µL. An adjustment tool rotates an eccentric bushing to precisely make microvolume adjustments. There are four standard pump head options available to provide a fluid path with maximum chemical and dispense volume/flow rate compatibility.
http://www.FluidMetering.com
FRITSCH—Booth 2862
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig7.jpg)
Knife Mill
The PULVERISETTE 11 knife mill from FRITSCH GmbH is for very fast and gentle comminution and homogenization of moist, oily, fatty, soft, medium-hard, and fibrous samples. Features include an autoclavable 1.4-L grinding vessel made of transparent and scratch-resistant plastic PC or 316L stainless steel, simple programming and saving of standard operating procedures (SOPs), and practical reduction lid made of plastic PP for reduction of the grinding chamber volume to 0.54 L for clean grinding. Applications include the food industry, agriculture and forestry, pharmaceuticals, and biology.
![FRITSCH—Booth 2862](https://media.americanlaboratory.com/m/20/article/344056_fig2.jpg)
Particle Sizer
The FRITSCH ANALYSETTE 28 ImageSizer is for the measurement of particle shape and size of suspensions and emulsions, and is well-suited for quality control, research, and laboratory tasks. For wet dispersion, the sample material is fed into a closed liquid circulation system and is pumped with high power through the measuring cell between the camera and LED strobe light. Continuously obtained images are the basis for analysis with a variety of evaluation possibilities. Results are available immediately.
http://www.fritsch.de
HEMCO—Booth 3253
![HEMCO—Booth 3253](https://media.americanlaboratory.com/m/20/article/344056_fig3.jpg)
Chemical-Resistant Fume Hoods
UniFlow AireStream Fume Hoods from HEMCO are constructed entirely of chemical-resistant, flame-retardant, nonmetallic composite resin materials and feature “Unitized” construction that does not require screws, bolts, rivets, or metallic hardware for assembly. The fume chamber is molded one-piece seamless with all corners coved for easy cleaning and light reflectivity. This series of fume hoods is UL 1805 certified and is offered in 48”, 60”, 72”, and 96” widths in either constant air volume or restricted bypass models.
http://www.hemcocorp.com
HORIBA Scientific—Booth 2819
![HORIBA; Booth 2819](https://media.americanlaboratory.com/m/20/article/344056_fig17.jpg)
Fluorescence/UV-VIS Spectrometer
The Duetta fluorescence/UV-VIS spectrometer combines fluorescence and absorbance spectroscopy into one compact instrument, eliminating the need for multiple scanning instruments. In addition to traditional fluorescence and UV-VIS-NIR absorbance spectroscopy modalities, Duetta features fluorescence excitation emission matrices (EEMs) with simultaneous absorbance measurement providing extended linear dynamic range with automatic inner filter effect corrections. Ultrafast CCD acquires an entire fluorescence spectrum with an effective scan speed of 1,000,000 nm/min, enabling acquisition of an entire EEM, simultaneously with absorbance-transmission, in <30 seconds.
http://www.horiba.com/us/en/scientific
HTA—Booth 3436
![HTA; Booth 3436](https://media.americanlaboratory.com/m/20/article/344056_fig28.jpg)
HPLC Autosampler
The economical HT1500L HPLC autosampler is an automated, high-quality instrument that offers good sample capacity, reliability, robustness, and durability. This compact autosampler is provided with HTA Autosampler Manager software for autosampler programming. The autosampler is compatible with all chromatography software systems. After setting the method once, the user need only load samples and press start.
http://www.hta-it.com
IBSEN PHOTONICS—Booth 3457
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig10.jpg)
Compact, High-Resolution Spectrometer
Ibsen Photonics offers the FREEDOM C spectrometer, which delivers very high resolution, down to 0.15 nm in a footprint of only 61 × 65 mm for the UV, VIS, and VIS/NIR range. It is equipped with the latest CMOS detector technology with 4096 pixels and a cylindrical lens to increase throughput. The spectrometer can be supplied with Ibsen DISB electronics, which offer fast and accurate timing control for applications such as LIBS and Raman.
https://ibsen.com
IONICON—Booth 2709
![IONICON; Booth 2709](https://media.americanlaboratory.com/m/20/article/344056_fig15.jpg)
Aerosol Inlet for PTR-TOFMS
In combination with the IONICON PTR-MS technology, the CHARON particle inlet detects the most abundant range of atmospheric organic carbon, compared to other analyzers or inlet systems. Users can now employ their real-time analytical instrument to monitor gas-phase organics and particulate intermediate, and semi- and low-volatile organic compounds (IVOCs, SVOCs, and LVOCs, respectively).
http://www.ionicon.com
LECO—Booth 2753
![LECO; Booth 2753](https://media.americanlaboratory.com/m/20/article/344056_fig20.jpg)
Carbon/Nitrogen Analysis System
LECO’s 928 series will transform the way users determine carbon and nitrogen in a variety of organic materials.The latest advancement maintains the core capabilities and performance of previous generations of LECO macro-combustion instruments, while adding key improvements in throughput, uptime, and reliability. By incorporating state-of-the-art hardware and an on-board touchscreen software platform with rapid analysis times, the 928 series operates at a low cost-per-analysis and allows users to easily handle the most demanding sample applications.
http://www.leco.com
MOTIC—Booth 2326
![MOTIC; Booth 2326](https://media.americanlaboratory.com/m/20/article/344056_fig19.jpg)
Smart Microscopes
The Panthera Series of smart microscopes from Motic provide maximum convenience and streamline workflow. Smart features, such as ImageOnDevice, instantly produce digital images without the need for a computer, while LightTracer technology recalls user-defined lighting conditions.
http://www.motic.com
NABERTHERM—Booth 3308
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig8.jpg)
Split-Type Furnaces for Horizontal or Vertical Operation
RSH-Series split-type tube furnaces from Nabertherm come in a tabletop design for horizontal use with integrated controls, while the RSV-Series is designed for vertical operation. The controls are built in a separate compact cabinet. All new models are equipped with the B400–P470 controllers with integrated process documentation. The operator can easily read out the temperature curve by inserting a USB flash drive into the front socket of the controller. The process can be evaluated via the freeware program NTGraph, which runs on MS Excel.
http://www.nabertherm.com
NUAIRE—Booth 2036
![NUAIRE; Booth 2036](https://media.americanlaboratory.com/m/20/article/344056_fig24.jpg)
3-L General-Purpose Centrifuges
NuWind NU-C300 series centrifuges allow the separation of research samples of different densities by holding them in suspension or emulsion in a liquid by using centrifugal force. The high-quality centrifuges are highly functional, with a maximum capacity of 4 × 750 mL. Offered in benchtop and floor-model configurations, each centrifuge is designed to maximize productivity while minimizing bench space.
https://www.nuaire.com
OI ANALYTICAL—Booth 1439
![OI ANALYTICAL; Booth 1439](https://media.americanlaboratory.com/m/20/article/344056_fig21.jpg)
TOC Analyzer
OI Analytical’s 1080 Combustion TOC Analyzer tests extremely difficult samples, including those high in salts, without expensive options/add-ons. This easy-to-maintain system offers the lowest total operating cost of any combustion TOC available. Proprietary technologies significantly reduce maintenance and downtime, extend the life of the catalyst, and provide flexibility over a large sample range. The analyzer is well-suited for drinking water, wastewater, industrial effluent, petrochemical, environmental lab, and food and beverage applications.
http://www.oico.com
OROCHEM TECHNOLOGIES—Booth 1230
![OROCHEM TECHNOLOGIES;Booth 1230](https://media.americanlaboratory.com/m/20/article/344056_fig13.jpg)
SPE Product
The Panthera Deluxe Polymeric SPE product is both high performing and affordable. The sorbent is based on a poly-DVB polymer, which provides both hydrophobic and hydrophilic retention. It has high capacity and demonstrates retention of a full range of neutral, basic, and acidic compounds such as pain management drugs and other pharmaceuticals. The product has been quickly adopted by major CROs globally.
http://www.orochem.com
PHENOMENEX—Booth 3053
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig9.jpg)
Mobile Phase/Solvent Waste Safety System for HPLC and UHPLC
The SecurityCAP from Phenomenex is a mobile phase and solvent waste safety system that prevents dangerous vapors and gases as well as airborne particulates from leaving solvent reservoirs and waste containers used with HPLC/UHPLC instruments. Over time, these solvent vapors from commonly used chemicals can have a negative impact on the health of employees and visitors in the laboratory. SecurityCAP systems are offered in a variety of sizes to fit multiple solvent bottles and waste containers commonly used in the HPLC/UHPLC laboratory.
http://www.phenomenex.com
PROTON ONSITE—Booth 1361
![PROTON ONSITE; Booth 1361](https://media.americanlaboratory.com/m/20/article/344056_fig25.jpg)
Laboratory-Sized Hydrogen Generator
Proton OnSite’s G4800 laboratory-sized hydrogen generator is designed for multiple GC, FID, and carrier gas applications. Also known as the “lab server,” the G4800 is the only generator large enough to handle all carrier gas requirements. It utilizes Proton Exchange Membrane (PEM) cell stack and PSA technology to produce UHP hydrogen for laboratory applications. Click here to learn more about Proton OnSite’s Hydrogen Lab Server Solutions.
http://protononsite.com
SHIMADZU SCIENTIFIC INSTRUMENTS—Booth 2734
![Image](https://media.americanlaboratory.com/m/20/article/344056_fig4.jpg)
Compact FTIR Spectrophotometer
Small and lightweight, Shimadzu’s IRSpirit FTIR spectrophotometer provides good functionality, reliability, and ease-of-use in its class of compact instruments. Its design allows access from two sides, and its sample compartment is the widest of any other compact FTIR, easily accommodating a variety of accessories. A guided workflow-based software program (IRPilot) ensures quick and accurate measurement for all users, while specialized programs simplify identification tests and contaminant analyses.
http://www.ssi.shimadzu.com
SIRIUS AUTOMATION—Booth 1862
![SIRIUS AUTOMATION; Booth 1862](https://media.americanlaboratory.com/m/20/article/344056_fig27.jpg)
General-Purpose Modular Laboratory Robot Platform
The MiniTasker general-purpose modular laboratory robot is for such everyday tasks as analytical weighing (4 or 5 place), sample ID (1-D or 2-D barcodes), sorting, dilutions, internal standard addition, standard prep, uncapping and recapping, transfers, and aliquoting. Features include a large sample capacity (max. 20 microplate racks or custom equivalent) and choice of disposables and labware. The platform has a footprint of just 3’ × 2’, and its easy-to-use interface (21 CFR11 compliance options) enables LIMS-compatible data management.
https://www.siriusautomation.com/
WILMAD-LABGLASS—Booth 2955
![WILMAD-LABGLASS; Booth 2955](https://media.americanlaboratory.com/m/20/article/344056_fig26.jpg)
Reaction Monitoring System NMR Tube
Designed to monitor reactions from start to finish, the Wilmad-LabGlass Reaction Monitoring System is an economical and easy-to-use solution for studying kinetics and determining reaction end points. The two-chamber borosilicate glass NMR tube allows for in-tube mixing, which provides a clear “before and after” reaction picture and may allow for capture of initial kinetic data points. The system is cost-effective compared to real-time acquisition systems, and allows researchers to run reaction experiments without specialized instruments or equipment.
http://www.wilmad-labglass.com