Article Archives

Filter

Hide Filter
  • Thorough Risk Assessment Supports At-Scale Process Safety

    Thorough Risk Assessment Supports At-Scale Process Safety

    Wednesday, June 11, 2014
    Application Note
    Urs Groth
    It goes without saying that in any manufacturing environment no one sets out to design an unsafe process. However, it is not enough to ensure a process will be safe under normal operating conditions. read more
  • LIMS and Public Health

    LIMS and Public Health

    Tuesday, September 01, 2009
    Technical Article
    William Qualls
    The current H1N1 flu pandemic has put a spotlight on public health agencies as they work to identify and contain the outbreak. read more
  • A Nondestructive Technique for the Detection of Metallic Impurities in Alloys

    A Nondestructive Technique for the Detection of Metallic Impurities in Alloys

    Tuesday, September 01, 2009
    Application Note
    John R. Dannecker, Neil D. Fichtelberg, Scott A. Knowles
    Examples of welds contaminated with small quantities of incorrect weld filler metal were recently discovered in fabricated assemblies. The presence of such impurities, which are not detectable using ... read more
  • 1-mm-i.d. Monolithic HPLC Columns for High-Efficiency Protein Separations

    1-mm-i.d. Monolithic HPLC Columns for High-Efficiency Protein Separations

    Tuesday, September 01, 2009
    Application Note
    Sebastiaan Eeltink, Remco Swart
    The preparation of monolithic separation media for HPLC composed of a single, continuous polymer macroporous support has been reported since the late 1960s. Due to its unique material properties, ... read more
  • Design and Application of a Virtual Ion Meter Based on Graphical Programming Software

    Design and Application of a Virtual Ion Meter Based on Graphical Programming Software

    Tuesday, September 01, 2009
    Technical Article
    Hu Meng, Jiang-Yuan Li, Yong-Huai Tang
    The ion meter is one of the most widely used analytical instruments in scientific research and routine laboratory practice in the biomedical, chemical, and environmental fields. In general, the data ... read more
  • A Multifrequency Temperature-Modulated Technique For DSC

    A Multifrequency Temperature-Modulated Technique For DSC

    Sunday, January 01, 2006
    Application Note
    Markus Schubnell, Christoph Heitz, Thomas Hütter, Steven Sauerbrunn, Juergen E.K. Schawe
    In conventional differential scanning calorimetry (DSC), a sample is subjected to a temperature program with a constant heating rate. As a result, the DSC instrument delivers an output signal, which, ... read more
  • A High-Sensitivity Sensor for DSC

    A High-Sensitivity Sensor for DSC

    Friday, August 05, 2005
    Application Note
    Rudolf Riesen, Blaine Weddle
    A dramatic increase in sensitivity at low signal noise without a significant loss in signal resolution has been achieved with the HSS7 high-sensitivity sensor. read more
  • <<
  • >>